{"id":3159904419921,"title":"Maxx CNC Aluminum Hopup Chamber MI-PRO w\/LED","handle":"maxx-cnc-aluminum-hopup-chamber-mi-pro-w-led","description":"\u003cp\u003eCNC Aluminum Hopup Chamber MI Pro (with BB Latching System) \u0026amp; UV LED Tracer unit is precisely made to improve accuracy and ensure consistent air seal for ICS CXP\/CS4\/EBB (include old models) M4\/M16 AEG series.̴Ì_\u003cbr\u003eThe Hopup Chamber MI unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.̴Ì_\u003cbr\u003eThe Hopup Chamber MI unit is designed to accept ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm, and also fully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.̴Ì_\u003cbr\u003eThe Hopup Chamber MI Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to stock gear box or any V2 gear boxes with 11.5mm or 12mm inner bore.̴Ì_\u003cbr\u003eMore than that, the Hopup Chamber MI Pro unit is specially designed with BB Latching System to prevent dropping BBs after removing the magazine. The Latching System can be also manually opened to release BBs from inside hopup chamber by hand.̴Ì_\u003cbr\u003eThe Dual UV LED Boards and Module set is also included with this hopup chamber unit to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad).̴Ì_\u003cbr\u003e\u003cbr\u003e***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor\/HPA firing when the magazine is empty. (Sold separately)̴Ì_\u003cbr\u003e***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x CNC Aluminum Hopup Chamber MI Pro (with BB Latching System) unit\u003c\/li\u003e\n\u003cli\u003e1 x Dual UV LED Boards and Module set\u003c\/li\u003e\n\u003cli\u003e2 x Strong Clear Vinyl Cover set\u003c\/li\u003e\n\u003cli\u003e1 x CNC Aluminum Standard-Hop Arm\u003c\/li\u003e\n\u003cli\u003e1 x CNC Aluminum R-Hop Arm\u003c\/li\u003e\n\u003cli\u003e1 x Silicone Rubber Standard-Hop Nub Damper\u003c\/li\u003e\n\u003cli\u003e1 x Silicone Rubber R-Hop Nub Damper\u003c\/li\u003e\n\u003cli\u003e1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub\u003c\/li\u003e\n\u003cli\u003e1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub\u003c\/li\u003e\n\u003cli\u003e1 x CNC Brass Threaded Slot Pin\u003c\/li\u003e\n\u003cli\u003e1 x CNC Delrin Locking C-Clip\u003c\/li\u003e\n\u003cli\u003e1 x CNC Barrel Brass Spacer\u003c\/li\u003e\n\u003cli\u003e1 x Brass Spacer Holder Oring\u003c\/li\u003e\n\u003cli\u003e3 x Steel Compression Spring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability\u003c\/li\u003e\n\u003cli\u003eImproved accuracy and ensure consistent air seal for ICS CXP\/CS4\/EBB (include old models) M4\/M16 AEG series\u003c\/li\u003e\n\u003cli\u003ePrecision rotary dial design for fine hopup adjustments\u003c\/li\u003e\n\u003cli\u003eRe-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot\u003c\/li\u003e\n\u003cli\u003eRemovable Brass Threaded Slot Pin for setup and maintenance\u003c\/li\u003e\n\u003cli\u003eCompatible with ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm\u003c\/li\u003e\n\u003cli\u003eFully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs\u003c\/li\u003e\n\u003cli\u003eEquipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting\u003c\/li\u003e\n\u003cli\u003eEquipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight\u003c\/li\u003e\n\u003cli\u003eCompatible with stock gear box or any V2 gear boxes with 11.5mm or 12mm bore\u003c\/li\u003e\n\u003cli\u003eSpecially designed with BB Latching System to prevent dropping BBs after removing the magazine\u003c\/li\u003e\n\u003cli\u003eManually opened to release BBs from inside hopup chamber by hand\u003cbr\u003eIncluded the Dual UV LED Boards and Module set to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad)\u003c\/li\u003e\n\u003cli\u003eThe Empty Magazine Detection Sensor to stop Motor\/HPA firing ready!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatible with ICS CXP\/CS4\/EBB (include old models) M4\/M16 AEG series̴Ì_̴Ì_̴Ì_̴Ì_\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eICS CXP series̴Ì_\u003c\/li\u003e\n\u003cli\u003eICS CS4 series̴Ì_\u003c\/li\u003e\n\u003cli\u003eICS EBB series\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2019-08-02T21:42:26+08:00","created_at":"2019-08-02T21:49:15+08:00","vendor":"MAXX","type":"Rifle Parts","tags":["Category_Hop-Up Assembly","Rifle - Hop-Up Parts","spo-disabled","Suitable_ICS CS4 Series","Suitable_ICS CXP Series","Suitable_ICS EBB Series","Type_Electric Airsoft"],"price":58500,"price_min":58500,"price_max":58500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23774358274129,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MAXX-HOP006PRL","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Maxx CNC Aluminum Hopup Chamber MI-PRO w\/LED","public_title":null,"options":["Default Title"],"price":58500,"weight":50,"compare_at_price":null,"inventory_management":"shopify","barcode":"MAXX-HOP006PRL"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0104\/6668\/9105\/products\/MAXX-HOP006PRL_35409_MAXX_HOP006PRL_02_ori.jpg?v=1577863902","\/\/cdn.shopify.com\/s\/files\/1\/0104\/6668\/9105\/products\/MAXX-HOP006PRL_35409_MAXX_HOP006PRL_01_ori.jpg?v=1577863907","\/\/cdn.shopify.com\/s\/files\/1\/0104\/6668\/9105\/products\/MAXX-HOP006PRL_35409_MAXX_HOP006PRL_03_ori.jpg?v=1577863911"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0104\/6668\/9105\/products\/MAXX-HOP006PRL_35409_MAXX_HOP006PRL_02_ori.jpg?v=1577863902","options":["Title"],"media":[{"alt":"Maxx CNC Aluminum Hopup Chamber MI-PRO w\/LED-WGCShop","id":1770432102481,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0104\/6668\/9105\/products\/MAXX-HOP006PRL_35409_MAXX_HOP006PRL_02_ori.jpg?v=1569250688"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0104\/6668\/9105\/products\/MAXX-HOP006PRL_35409_MAXX_HOP006PRL_02_ori.jpg?v=1569250688","width":1200},{"alt":"Maxx CNC Aluminum Hopup Chamber MI-PRO w\/LED-WGCShop","id":1770432168017,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0104\/6668\/9105\/products\/MAXX-HOP006PRL_35409_MAXX_HOP006PRL_01_ori.jpg?v=1569250688"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0104\/6668\/9105\/products\/MAXX-HOP006PRL_35409_MAXX_HOP006PRL_01_ori.jpg?v=1569250688","width":1200},{"alt":"Maxx CNC Aluminum Hopup Chamber MI-PRO w\/LED-WGCShop","id":1770432233553,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0104\/6668\/9105\/products\/MAXX-HOP006PRL_35409_MAXX_HOP006PRL_03_ori.jpg?v=1569250688"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0104\/6668\/9105\/products\/MAXX-HOP006PRL_35409_MAXX_HOP006PRL_03_ori.jpg?v=1569250688","width":1200}],"content":"\u003cp\u003eCNC Aluminum Hopup Chamber MI Pro (with BB Latching System) \u0026amp; UV LED Tracer unit is precisely made to improve accuracy and ensure consistent air seal for ICS CXP\/CS4\/EBB (include old models) M4\/M16 AEG series.̴Ì_\u003cbr\u003eThe Hopup Chamber MI unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.̴Ì_\u003cbr\u003eThe Hopup Chamber MI unit is designed to accept ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm, and also fully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.̴Ì_\u003cbr\u003eThe Hopup Chamber MI Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to stock gear box or any V2 gear boxes with 11.5mm or 12mm inner bore.̴Ì_\u003cbr\u003eMore than that, the Hopup Chamber MI Pro unit is specially designed with BB Latching System to prevent dropping BBs after removing the magazine. The Latching System can be also manually opened to release BBs from inside hopup chamber by hand.̴Ì_\u003cbr\u003eThe Dual UV LED Boards and Module set is also included with this hopup chamber unit to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad).̴Ì_\u003cbr\u003e\u003cbr\u003e***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor\/HPA firing when the magazine is empty. (Sold separately)̴Ì_\u003cbr\u003e***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x CNC Aluminum Hopup Chamber MI Pro (with BB Latching System) unit\u003c\/li\u003e\n\u003cli\u003e1 x Dual UV LED Boards and Module set\u003c\/li\u003e\n\u003cli\u003e2 x Strong Clear Vinyl Cover set\u003c\/li\u003e\n\u003cli\u003e1 x CNC Aluminum Standard-Hop Arm\u003c\/li\u003e\n\u003cli\u003e1 x CNC Aluminum R-Hop Arm\u003c\/li\u003e\n\u003cli\u003e1 x Silicone Rubber Standard-Hop Nub Damper\u003c\/li\u003e\n\u003cli\u003e1 x Silicone Rubber R-Hop Nub Damper\u003c\/li\u003e\n\u003cli\u003e1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub\u003c\/li\u003e\n\u003cli\u003e1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub\u003c\/li\u003e\n\u003cli\u003e1 x CNC Brass Threaded Slot Pin\u003c\/li\u003e\n\u003cli\u003e1 x CNC Delrin Locking C-Clip\u003c\/li\u003e\n\u003cli\u003e1 x CNC Barrel Brass Spacer\u003c\/li\u003e\n\u003cli\u003e1 x Brass Spacer Holder Oring\u003c\/li\u003e\n\u003cli\u003e3 x Steel Compression Spring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability\u003c\/li\u003e\n\u003cli\u003eImproved accuracy and ensure consistent air seal for ICS CXP\/CS4\/EBB (include old models) M4\/M16 AEG series\u003c\/li\u003e\n\u003cli\u003ePrecision rotary dial design for fine hopup adjustments\u003c\/li\u003e\n\u003cli\u003eRe-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot\u003c\/li\u003e\n\u003cli\u003eRemovable Brass Threaded Slot Pin for setup and maintenance\u003c\/li\u003e\n\u003cli\u003eCompatible with ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm\u003c\/li\u003e\n\u003cli\u003eFully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs\u003c\/li\u003e\n\u003cli\u003eEquipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting\u003c\/li\u003e\n\u003cli\u003eEquipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight\u003c\/li\u003e\n\u003cli\u003eCompatible with stock gear box or any V2 gear boxes with 11.5mm or 12mm bore\u003c\/li\u003e\n\u003cli\u003eSpecially designed with BB Latching System to prevent dropping BBs after removing the magazine\u003c\/li\u003e\n\u003cli\u003eManually opened to release BBs from inside hopup chamber by hand\u003cbr\u003eIncluded the Dual UV LED Boards and Module set to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad)\u003c\/li\u003e\n\u003cli\u003eThe Empty Magazine Detection Sensor to stop Motor\/HPA firing ready!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatible with ICS CXP\/CS4\/EBB (include old models) M4\/M16 AEG series̴Ì_̴Ì_̴Ì_̴Ì_\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eICS CXP series̴Ì_\u003c\/li\u003e\n\u003cli\u003eICS CS4 series̴Ì_\u003c\/li\u003e\n\u003cli\u003eICS EBB series\u003c\/li\u003e\n\u003c\/ul\u003e"}

Maxx CNC Aluminum Hopup Chamber MI-PRO w/LED

Product Description

CNC Aluminum Hopup Chamber MI Pro (with BB Latching System) & UV LED Tracer unit is precisely made to improve accuracy and ensure consistent air seal for ICS CXP/CS4/EBB (include old models) M4/M16 AEG series.̴Ì_
The Hopup Chamber MI unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.̴Ì_
The Hopup Chamber MI unit is designed to accept ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm, and also fully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.̴Ì_
The Hopup Chamber MI Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to stock gear box or any V2 gear boxes with 11.5mm or 12mm inner bore.̴Ì_
More than that, the Hopup Chamber MI Pro unit is specially designed with BB Latching System to prevent dropping BBs after removing the magazine. The Latching System can be also manually opened to release BBs from inside hopup chamber by hand.̴Ì_
The Dual UV LED Boards and Module set is also included with this hopup chamber unit to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad).̴Ì_

***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor/HPA firing when the magazine is empty. (Sold separately)̴Ì_
***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!

$585.00
Maximum quantity available reached.

Includes:

  • 1 x CNC Aluminum Hopup Chamber MI Pro (with BB Latching System) unit
  • 1 x Dual UV LED Boards and Module set
  • 2 x Strong Clear Vinyl Cover set
  • 1 x CNC Aluminum Standard-Hop Arm
  • 1 x CNC Aluminum R-Hop Arm
  • 1 x Silicone Rubber Standard-Hop Nub Damper
  • 1 x Silicone Rubber R-Hop Nub Damper
  • 1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub
  • 1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub
  • 1 x CNC Brass Threaded Slot Pin
  • 1 x CNC Delrin Locking C-Clip
  • 1 x CNC Barrel Brass Spacer
  • 1 x Brass Spacer Holder Oring
  • 3 x Steel Compression Spring

Features:

  • Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
  • Improved accuracy and ensure consistent air seal for ICS CXP/CS4/EBB (include old models) M4/M16 AEG series
  • Precision rotary dial design for fine hopup adjustments
  • Re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
  • Removable Brass Threaded Slot Pin for setup and maintenance
  • Compatible with ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm
  • Fully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
  • Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting
  • Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
  • Compatible with stock gear box or any V2 gear boxes with 11.5mm or 12mm bore
  • Specially designed with BB Latching System to prevent dropping BBs after removing the magazine
  • Manually opened to release BBs from inside hopup chamber by hand
    Included the Dual UV LED Boards and Module set to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad)
  • The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

Compatible with ICS CXP/CS4/EBB (include old models) M4/M16 AEG series̴Ì_̴Ì_̴Ì_̴Ì_

  • ICS CXP series̴Ì_
  • ICS CS4 series̴Ì_
  • ICS EBB series
Sku: MAXX-HOP006PRL
Vendor: MAXX
Weight: 50 g

Related Products